1 XMT-8 series digital temperature controller

XMT-8 series digital temperature controller

Model number and parameters
Model numberExternal dimensionsPerforation dimensionsOnline store: 
XMTG-848x48x110 mm44 10x44 10 mmUS $39.99 - 56.69/ pieceOrder (24)
XMTE-848X96X110 mm44 10x92 10 mmUS $39.99 - 56.69/ pieceOrder (24)
XMTF-896x48x110 mm92 10x44 10 mmUS $39.99 - 56.69/ pieceOrder (24)
XMTD-872x72x110 mm68 10x68 10 mmUS $39.99 - 56.69/ pieceOrder (24)
XMTA-896x96x110 mm92 10x92 10 mmUS $39.99 - 56.69/ pieceOrder (24)
XMT-8160x80x110 mm152 10x76 10 mmUS $39.99 - 56.69/ pieceOrder (24)
XMT-8SPC softwareFor RS485 type controller
General
Model number XMT-8 series
Accuracy ±0.5%F.S±1℃
Supply voltage 85-242Vac,50/60 Hz
Input type Thermocouple: K, J, S, B, E, N, T, WRe
RTD: Pt100, Cu50
Voltage: 0-5V, 1-5V, 0-1V, 0-100mV, 0-20mV (Need to be customized, default don't have)
Current: 0-20mA, 4-20mA, 0-10mA (Need to be customized, default don't have)
Output type Electromagnetic relay, SSR, current, triac (not in one product, need to be selected)
Auxiliary function Ramp/soak, communication (RS485 or RS232 interface)
Power consumption Less than 4W
Control method PID, or ON/OFF
Setting method Touch switch
Indication method 8-segment 4-digital display and LED indication
Alarms 1. Alarm quantity: XMTG-P: 1pcs, others: default is 1pcs, if 2pcs, need to be customized
2. Alarm form: ALM1: High limit alarm
ALM2: Low limit alarm
Hy-1: Positive deviation alarm
Hy-2: Negative deviation alarm
Sampling period 0.5s
Control period Electromagnetic relay output: 2-120s (can adjust), others: 2s
Operating temperature 0 to 50 ℃ (32 to 122 ℉)
Operating humidity 85% RH max, non-condensing
Alias name XMT-P series pid temperature controller, intelligent temperature controller
Output type and description
Electromagnetic relay Contact rating: 5A at 220Vac
Solid state relay Contact rating can be selected, order separately (Single phase 40AThree phase 40A)
Current Can be any value in 0-22mA
SCR Zero crossing pulse, Amplitude>3V, width>50us, the instrument's supply voltage and load must be same phase current
Auxiliary function
Ramp/soak 30 segments program, can set up or down ramp
Programming example:
Rise to 50 degrees for 48 minutes
Rise to 550 degrees for 120 minutes
Rise to 980 degrees for 150 minutes
Hold for 5 minutes and then stop
C01=25, T01=48
C02=50, T02=120
C03=550,T03=150
C04=980,T04=5
C05=980,T05=-121
Communication RS485 or RS232 interface (Standard Modbus RTU protocol, you need write the software yourself or buy the PC software from us)
Input type and measuring range
K -50-1300 ℃ (BoltPress springRingM12 probeM8 probeFlexible probeArmor high temperature resistantCustomized thread probe)
S -50-1700 ℃ (ProbeArmor)
B 0-1800 ℃
E 0-800 ℃ (BoltPress springRingProbeCustomized thread probe)
N 0-1300 ℃
T -200-350 ℃
WRe 0-2300 ℃
Pt100 -199.9-649.0 ℃ (BoltPress springRingProbePolish rodPolish rod waterproofPolish rod waterproof anticorrosiveFlexible probeCustomized thread probe)
Cu50 -50-150 ℃ (ProbePolish rod waterproof)
Voltage 0-5V, 1-5V 0.0-100.0 ℃
Current 0-20mA, 4-20mA 0.0-100.0 ℃