S-600 series 600W general switching power supply

Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
▇ Model number and parameters
Model number S-600-5 S-600-12 S-600-15 S-600-24 S-600-36 S-600-48
Online store:  US $43.5/ pieceOrder US $43.5/ pieceOrder US $43.5/ pieceOrder US $43.5/ pieceOrder US $43.5/ pieceOrder US $43.5/ pieceOrder
DC output voltage 5V 12V 15V 24V 36V 48V
Output voltage error (Note: 2) ±0.5% ±1% ±1% ±1% ±1% ±1%
Rated output current 80A 50A 40A 25A 16.6A 12.5A
Output current rage 0-80A 0-50A 0-40A 0-25A 0-16.6A 0-12.5A
Wave and noise (Note: 3) 75mVp-p 120mVp-p 150mVp-p 240mVp-p 240mVp-p 240mVp-p
Inlets tability (Note: 4) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load stability (Note: 5) ±0.5% ±1% ±1% ±1% ±1% ±1%
DC output power 400W 600W 600W 600W 600W 600W
Effciency 80% 83% 84% 86% 86% 87%
Adjustable range for DC voltage +10% +10% +10% +10% +10% +10%
▇ General
Model number S-600 series
AC input voltage range 190-240VAC, 47-63Hz
Input current 5A/230V
AC inrush current Cold-start current: 46A/230V
Leakage current 3.5mA/240VAC max
Overload proctection 120%-150% Type:Foldback current limiting Rest:auto-recovery
Over-voltage protection 120%-150% Type:hiccup mode Rest:auto-recovery
High-temperature protection ERH3≥65℃-70℃ fan start, ≤55℃-60℃ fan close, ≥80℃-85℃, switch off output (5-15V)-(24-48V)
Temperature coefficient ±0.03%/℃ (0-50℃)
Setup rise hold up time 1s, 100ms, 50ms
Vibration 10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axes
Dielectric strength 1.5KVac, 50/60 Hz for 1 min between input and output
1.5KVac, 50/60 Hz for 1 min between input and enclosure
0.5KVac, 50/60 Hz for 1 min between output and enclosure
Isolation resistance 100MΩ min. at 500 VDC
Working temperature humidity -10℃-60℃ (Refer to output characteristic figure), 20%-90%RH
Store temperature humidity -20℃-85℃, 10%-95%RH
External dimension 238x124x65 mm
Weight 1.4kg
Safety standards GB4949,UL60950,EN60950
EMC standards GB9254 EN55022 EN55024 A level
Note 1. The testing condition for the above paramenter is: 230VAC input, rated load, 25℃, Humidity 70%RH.
2. Error, include the setting error, line stability and load stability. (Note:5)
3. Wave test: adopting A12 double wire for 20MHZ,and 0.1uF-47uF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load,the lowest voltage of enter is representative to the highest voltage
5. Load stability test: The load is from 0% to 100%.
S-600 series general switching power supply mounting dimensions