S-60 series 60W general switching power supply

Model number and parameters
Model number S-60-5 S-60-12 S-60-15 S-60-24
Online store:  US $9.58/ pieceOrder US $9.58/ pieceOrder US $9.58/ pieceOrder US $9.58/ pieceOrder
DC output voltage 5V 12V 15V 24V
Output voltage error (Note: 2) ±2% ±1% ±1% ±1%
Rated output current 12A 5A 4A 2.5A
Output current rage 0-12A 0-5A 0-4A 0-2.5A
Wave and noise (Note: 3) 100mVp-p 75mVp-p 75mVp-p 75mVp-p
Inlets tability (Note: 4) ±0.5% ±0.5% ±0.5% ±0.5%
Load stability (Note: 5) ±1% ±0.5% ±0.5% ±0.5%
DC output power 60W 60W 60W 60W
Effciency 73% 78% 78% 82%
Adjustable range for DC voltage +10,-5% +10% +10% +10%
General
Model number S-60 series
AC input voltage range 85-132VAC/170-264VAC, selected by switch, 47-63Hz; 240-370VDC
Input current 2A/115V, 1A/230V
AC inrush current Cold-start current: 30A/115V, 60A/230V
Leakage current 3.5mA/240VAC max
Overload proctection 105%-150% Type:Foldback current limiting Rest:auto-recovery
Temperature coefficient ±0.03%/℃ (0-50℃)
Setup rise hold up time 800ms,50ms,10ms/150v,300ms,50ms,80ms/230v
Vibration 10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axes
Dielectric strength 1.5KVac, 50/60 Hz for 1 min between input and output
1.5KVac, 50/60 Hz for 1 min between input and enclosure
0.5KVac, 50/60 Hz for 1 min between output and enclosure
Isolation resistance 100MΩ min. at 500 VDC
Working temperature humidity -10℃-60℃ (Refer to output characteristic figure), 20%-90%RH
Store temperature humidity -20℃-85℃, 10%-95%RH
External dimension 157x97x38 mm
Weight 0.55kg
Safety standards UL1012 TUV refer to 6050 (IEC,UL1950) verification
EMC standards CISPR22(refer to 55022), IEC801-2,3,4IEC555-2 verification
Note 1. The testing condition for the above paramenter is: 230VAC input, rated load, 25℃, Humidity 70%RH.
2. Error, include the setting error, line stability and load stability. (Note:5)
3. Wave test: adopting A12 double wire for 20MHZ,and 0.1uF-47uF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load,the lowest voltage of enter is representative to the highest voltage
5. Load stability test: The load is from 0% to 100%.
S-60 series general switching power supply mounting dimensions