<
S-400 series 400W general switching power supply
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
▇ Model number and parameters
Model number | S-400-12 | S-400-15 | S-400-24 | S-400-36 | S-400-48 |
Online store: | US $23.28/ pieceOrder | US $23.28/ pieceOrder | US $23.28/ pieceOrder | US $23.28/ pieceOrder | US $23.28/ pieceOrder |
DC output voltage | 12V | 15V | 24V | 36V | 48V |
Output voltage error (Note: 2) | ±2% | ±2% | ±1% | ±1% | ±1% |
Rated output current | 33A | 26.6A | 16.6A | 11A | 8.3A |
Output current rage | 0-33A | 0-26.6A | 0-16.6A | 0-11A | 0-8.3A |
Wave and noise (Note: 3) | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p |
Inlets tability (Note: 4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stability (Note: 5) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
DC output power | 396W | 399W | 398W | 396W | 396W |
Effciency | 80% | 81% | 83% | 83% | 84% |
Adjustable range for DC voltage | +10% | +10% | +10% | +10% | +10% |
▇ General
Model number | S-400 series |
AC input voltage range | 90-132VAC/180-264VAC, selected by switch, 47-63Hz; 254-370VDC |
Input current | 6A/115V, 3A/230V |
AC inrush current | Cold-start current: 25A/115V, 50A/230V |
Leakage current | 3.5mA/240VAC max |
Overload proctection | 105%-150% Type:Foldback current limiting Rest:auto-recovery |
Over-voltage protection | 115%-135% Type:hiccup mode Rest:auto-recovery |
Temperature coefficient | ±0.03%/℃ (0-50℃) |
Setup rise hold up time | 200s, 100ms, 30ms |
Vibration | 10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axes |
Dielectric strength | 1.5KVac, 50/60 Hz for 1 min between input and output 1.5KVac, 50/60 Hz for 1 min between input and enclosure 0.5KVac, 50/60 Hz for 1 min between output and enclosure |
Isolation resistance | 100MΩ min. at 500 VDC |
Working temperature humidity | -10℃-60℃ (Refer to output characteristic figure), 20%-90%RH |
Store temperature humidity | -20℃-85℃, 10%-95%RH |
External dimension | 215x115x50 mm |
Weight | 1.15kg |
Safety standards | GB4949,UL60950,EN60950 |
EMC standards | GB9254 EN55022 EN55024 A level |
Note | 1. The testing condition for the above paramenter is: 230VAC input, rated load, 25℃, Humidity 70%RH. 2. Error, include the setting error, line stability and load stability. (Note:5) 3. Wave test: adopting A12 double wire for 20MHZ,and 0.1uF-47uF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load,the lowest voltage of enter is representative to the highest voltage 5. Load stability test: The load is from 0% to 100%. |
S-400 series general switching power supply mounting dimensions