GAT10-30GM series general inductive proximity sensor

Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
Mouse over to zoom in
▇ Operating form and model number
Current typeOperating formContact formConnection formModel numberOnline store: 
DCNPNNOWire leadGAT10-30GM-N1US $4.92/ pieceOrder
DCNPNNCWire leadGAT10-30GM-N2
DCNPNNO+NCWire leadGAT10-30GM-N4
DCPNPNOWire leadGAT10-30GM-P1US $4.92/ pieceOrder
DCPNPNCWire leadGAT10-30GM-P2
DCPNPNO+NCWire leadGAT10-30GM-P4
DCTwo wiresNOWire leadGAT10-30GM-D1
DCTwo wiresNCWire leadGAT10-30GM-D2
ACTwo wiresNOWire leadGAT10-30GM-A1US $5.41/ pieceOrder
ACTwo wiresNCWire leadGAT10-30GM-A2US $5.41/ pieceOrder
▇ General
Model number GAT10-30GM series
External dimensions M30x1.5x60
Installation type Shielded
Detection distance 10mm±10%
Setting distance 0-8 mm
Supply voltage 12-24Vdc (6-36Vdc); 110-220Vac (36-250Vac), 50/60Hz
Rated output current N.P Type: 300mA max; D type: 200mA max; AC Type: 400mA
Standard detected object Mild steel (18x18x1mm)
Sensing object Magnetic metals (if it is not magnetic metals, the sensing distance would decrease)
Response frequency NPN or PNP: 0.4kHz; Two wires of DC: 0.4kHz; Two wires of AC: 25Hz
Leakage current N.P Type: 13mA max; D type: 0.8mA max; A Type: 1.7mA max
Hysteresis 10% max. of sensing distance
Protection circuit DC: Reverse connection protection, Surge suppressor, Short-circuit protection
AC: Surge suppressor
Insulation resistance 50MΩ min (between charging part and housing)
Dielectric strength 1000Vac, 1min (between charging part and housing)
Temperature influence ±10% max. of sensing distance at 23℃ within temperature range of -25℃ to 60℃
±15% max. of sensing distance at 23℃ within temperature range of -30℃ to 65℃
Voltage influence ±10% max. of sensing distance in rated voltage range ±15%
IP Rating IP67
Material Case: Brass-nickel plated; Sensing surface: ABS