<
GAM2-6.5MM series general inductive proximity sensor
▇ Operating form and model number
Current type | Operating form | Contact form | Connection form | Model number |
DC | NPN | NO | Wire lead | GAM2-6.5MM-N1 |
DC | NPN | NC | Wire lead | GAM2-6.5MM-N2 |
DC | PNP | NO | Wire lead | GAM2-6.5MM-P1 |
DC | PNP | NC | Wire lead | GAM2-6.5MM-P2 |
DC | Two wires | NO | Wire lead | GAM2-6.5MM-D1 |
DC | Two wires | NC | Wire lead | GAM2-6.5MM-D2 |
AC | Two wires | NO | Wire lead | GAM2-6.5MM-A1 |
AC | Two wires | NC | Wire lead | GAM2-6.5MM-A2 |
▇ General
Model number | GAM2-6.5MM series |
External dimensions | Φ6.5x45 |
Installation type | Non-shielded |
Detection distance | 2mm±10% |
Setting distance | 0-1.6 mm |
Supply voltage | 12-24Vdc (6-36Vdc); 110-220Vac (36-250Vac), 50/60Hz |
Rated output current | N.P Type: 300mA max; D type: 200mA max; AC Type: 400mA |
Standard detected object | Mild steel (12x12x1mm) |
Sensing object | Magnetic metals (if it is not magnetic metals, the sensing distance would decrease) |
Response frequency | NPN or PNP: 0.8kHz; Two wires of DC: 1kHz; Two wires of AC: 25Hz |
Leakage current | N.P Type: 13mA max; D type: 0.8mA max; A Type: 1.7mA max |
Hysteresis | 10% max. of sensing distance |
Protection circuit | DC: Reverse connection protection, Surge suppressor, Short-circuit protection AC: Surge suppressor |
Insulation resistance | 50MΩ min (between charging part and housing) |
Dielectric strength | 1000Vac, 1min (between charging part and housing) |
Temperature influence | ±10% max. of sensing distance at 23℃ within temperature range of -25℃ to 60℃ ±15% max. of sensing distance at 23℃ within temperature range of -30℃ to 65℃ |
Voltage influence | ±10% max. of sensing distance in rated voltage range ±15% |
IP Rating | IP67 |
Material | Case: Brass-nickel plated; Sensing surface: ABS |