<
GAT2-12GM series general inductive proximity sensor
Mouse over to zoom in
▇ Operating form and model number
| Current type | Operating form | Contact form | Connection form | Model number | Online store: |
| DC | NPN | NO | Wire lead | GAT2-12GM-N1 | US $2.59/ pieceOrder |
| DC | NPN | NC | Wire lead | GAT2-12GM-N2 | |
| DC | NPN | NO+NC | Wire lead | GAT2-12GM-N4 | |
| DC | PNP | NO | Wire lead | GAT2-12GM-P1 | US $2.59/ pieceOrder |
| DC | PNP | NC | Wire lead | GAT2-12GM-P2 | |
| DC | PNP | NO+NC | Wire lead | GAT2-12GM-P4 | |
| DC | Two wires | NO | Wire lead | GAT2-12GM-D1 | |
| DC | Two wires | NC | Wire lead | GAT2-12GM-D2 | |
| AC | Two wires | NO | Wire lead | GAT2-12GM-A1 | |
| AC | Two wires | NC | Wire lead | GAT2-12GM-A2 | |
| DC | NPN | NO | Connector | GAT2-12GM-N1-L | US $5.41/ pieceOrder |
| DC | NPN | NC | Connector | GAT2-12GM-N2-L | |
| DC | NPN | NO+NC | Connector | GAT2-12GM-N4-L | |
| DC | PNP | NO | Connector | GAT2-12GM-P1-L | |
| DC | PNP | NC | Connector | GAT2-12GM-P2-L | |
| DC | PNP | NO+NC | Connector | GAT2-12GM-P4-L | |
| DC | Two wires | NO | Connector | GAT2-12GM-D1-L | |
| DC | Two wires | NC | Connector | GAT2-12GM-D2-L | |
| AC | Two wires | NO | Connector | GAT2-12GM-A1-L | |
| AC | Two wires | NC | Connector | GAT2-12GM-A2-L |
▇ General
| Model number | GAT2-12GM series |
| External dimensions | M12x1x50 |
| Installation type | Shielded |
| Detection distance | 2mm±10% |
| Setting distance | 0-1.6 mm |
| Supply voltage | 12-24Vdc (6-36Vdc); 110-220Vac (36-250Vac), 50/60Hz |
| Rated output current | N.P Type: 300mA max; D type: 200mA max; AC Type: 400mA |
| Standard detected object | Mild steel (12x12x1mm) |
| Sensing object | Magnetic metals (if it is not magnetic metals, the sensing distance would decrease) |
| Response frequency | NPN or PNP: 1.5kHz; Two wires of DC: 1kHz; Two wires of AC: 25Hz |
| Leakage current | N.P Type: 13mA max; D type: 0.8mA max; A Type: 1.7mA max |
| Hysteresis | 10% max. of sensing distance |
| Protection circuit | DC: Reverse connection protection, Surge suppressor, Short-circuit protection AC: Surge suppressor |
| Insulation resistance | 50MΩ min (between charging part and housing) |
| Dielectric strength | 1000Vac, 1min (between charging part and housing) |
| Temperature influence | ±10% max. of sensing distance at 23℃ within temperature range of -25℃ to 60℃ ±15% max. of sensing distance at 23℃ within temperature range of -30℃ to 65℃ |
| Voltage influence | ±10% max. of sensing distance in rated voltage range ±15% |
| IP Rating | IP67 |
| Material | Case: Brass-nickel plated; Sensing surface: ABS |
RSS