<
HDM30-15K series prism amplifier photoelectric sensor
▇ Operating form and model number
| Current type | Operating form | Contact form | Model number |
| DC | NPN | NO | HDM30-15K-N1 |
| DC | NPN | NC | HDM30-15K-N1 |
| DC | PNP | NO | HDM30-15K-P1 |
| DC | PNP | NC | HDM30-15K-P2 |
| DC | NPN/PNP | NO/NC | HDM30-15K-X |
| AC | Two wires | NO | HDM30-15K-A1 |
| AC | Two wires | NC | HDM30-15K-A2 |
▇ General
| Model number | HDM30-15K series |
| External dimensions | 15x26x55 |
| Sensing method | Diffuse reflective |
| Detection distance | 30cm±10% |
| Sensitivity adjustment | Adjustable |
| Supply voltage | 12-24Vdc (6-36Vdc); 110-220Vac (90-250Vac), 50/60Hz |
| Rated output current | N.P Type: 300mA max; A Type: 400mA; J type: 2A max (contact life: 100000 times) |
| Sensing object | Opaque object |
| Response frequency | 500Hz |
| Response time | 1.5ms max |
| Light source | Infrared LED (660 nm) |
| Leakage current | N.P Type: 20mA max; A Type: 1.7mA max |
| Protection circuit | DC: Reverse connection protection, Surge suppressor, Short-circuit protection AC: Surge suppressor |
| Insulation resistance | 50 MΩ min. at 500 V DC between energized parts and case |
| Dielectric strength | 1000 VAC max., 50 / 60 Hz for 1 min between energized parts and case |
| Temperature influence | ±10% max. of sensing distance at 23℃ within temperature range of -25℃ to 60℃ ±15% max. of sensing distance at 23℃ within temperature range of -30℃ to 65℃ |
| Voltage influence | ±10% max. of sensing distance in rated voltage range ±15% |
| IP Rating | IP67 |
| Material | Case: Aluminum die-cast (ABS); Sensing surface (lens): PMMA |
| Operating temperature | -30 to 65 °C (with no icing or condensation) |
| Operating humidity | Storage: 35% to 95% (without condensation) |
RSS