<
LJ30A3-10 series cylinder inductive proximity sensor
Mouse over to zoom in
Mouse over to zoom in
▇ Operating form and model number
Current type | Operating form | Contact form | Connection form | Model number | Online store: |
DC | NPN | NO | Wire lead | LJ30A3-10-Z/BX | US $3.74/ pieceOrder |
DC | NPN | NC | Wire lead | LJ30A3-10-Z/AX | US $3.74/ pieceOrder |
DC | NPN | NO+NC | Wire lead | LJ30A3-10-Z/CX | |
DC | PNP | NO | Wire lead | LJ30A3-10-Z/BY | US $3.74/ pieceOrder |
DC | PNP | NC | Wire lead | LJ30A3-10-Z/AY | US $3.74/ pieceOrder |
DC | PNP | NO+NC | Wire lead | LJ30A3-10-Z/CY | |
DC | Two wires | NO | Wire lead | LJ30A3-10-Z/EX | US $3.74/ pieceOrder |
DC | Two wires | NC | Wire lead | LJ30A3-10-Z/DX | US $3.74/ pieceOrder |
AC | Two wires | NO | Wire lead | LJ30A3-10-J/EZ | US $3.74/ pieceOrder |
AC | Two wires | NC | Wire lead | LJ30A3-10-J/DZ | US $3.74/ pieceOrder |
▇ General
Model number | LJ30A3-10 series |
External dimensions | M30x75 |
Installation type | Shielded |
Detection distance | 10mm |
Setting distance | 0-8 mm |
Supply voltage | 6-36Vdc; 90-250Vac, 50/60Hz |
Output current | DC type: 300mA max; AC Type: 400mA |
Standard detected object | Mild steel (18x18x1mm) |
Sensing object | Magnetic metals (if it is not magnetic metals, the sensing distance would decrease) |
Response frequency | 500Hz |
Output indication | Red LED |
Short-circuit protection | Yes |
Reverse connection protection | Yes |
Insulation resistance | 50MΩ min (between charging part and housing) |
Dielectric strength | 1000Vac, 1min (between charging part and housing) |
IP Rating | IP67 |
Operating temperature | -25 to 70 ℃ (13 to 158 ℉) |
Cable length | 1.2m, PVC cable |
Material | Case: Brass-nickel plated; Sensing surface: ABS |