<
XDM10-30K series signal output inductive proximity sensor
▇ Operating form and model number
| Output type | Operating form | Contact form | Model number |
| Voltage | NPN | NO | XDM10-30K-N1U |
| Voltage | PNP | NO | XDM10-30K-P1U |
| Current | NPN | NO | XDM10-30K-N1 |
| Current | PNP | NO | XDM10-30K-P1 |
▇ General
| Model number | XDM10-30K series |
| External dimensions | 30x30x52 |
| Installation type | Non-shielded |
| Detection distance | 1...8mm |
| Voltage output | 0...10V |
| Load resistance-V | >=4.7KΩ |
| Current output | 0...20mA |
| Load resistance-C | <=500Ω |
| Supply voltage | 12-24Vdc (6-36Vdc), pulsation (p-p) below 10% |
| Control output | N.P Type: 300mA max |
| Standard detected object | Mild steel (45x45x1mm) |
| Sensing object | Magnetic metals (if it is not magnetic metals, the sensing distance would decrease) |
| Response frequency | 200Hz |
| Leakage current | N.P Type: 13mA max |
| Hysteresis | 10% max. of sensing distance |
| Protection circuit | DC: Reverse connection protection, Surge suppressor, Short-circuit protection AC: Surge suppressor |
| Insulation resistance | 50MΩ min (between charging part and housing) |
| Dielectric strength | 1000Vac, 1min (between charging part and housing) |
| Temperature influence | ±10% max. of sensing distance at 23℃ within temperature range of -25℃ to 60℃ ±15% max. of sensing distance at 23℃ within temperature range of -30℃ to 65℃ |
| Voltage influence | ±10% max. of sensing distance in rated voltage range ±15% |
| IP Rating | IP67 |
| Material | Case: ABS; Sensing surface: ABS |
RSS