<
PSN30-10 series prism shape inductive proximity sensor
▇ Operating form and model number
Current type | Operating form | Contact form | Model number |
DC | NPN | NO | PSN30-10DN |
DC | NPN | NC | PSN30-10DN2 |
DC | NPN | NO+NC | PSN30-10DN3 |
DC | PNP | NO | PSN30-10DP |
DC | PNP | NC | PSN30-10DP2 |
DC | PNP | NO+NC | PSN30-10DP3 |
DC | Two wires | NO | PSN30-10DO |
DC | Two wires | NC | PSN30-10DC |
DC | Two wires | NO | PSN30-10AO |
DC | Two wires | NC | PSN30-10AC |
▇ General
Model number | PSN30-10 series |
External dimensions | 30x30x53 |
Installation type | Non-shielded |
Detection distance | 10mm±10% |
Setting distance | 0-8 mm |
Supply voltage | 12-24Vdc (6-36Vdc); 110-220Vac (36-250Vac), 50/60Hz |
Rated output current | N.P Type: 300mA max; D type: 200mA max; AC Type: 400mA |
Standard detected object | Mild steel (45x45x1mm) |
Sensing object | Magnetic metals (if it is not magnetic metals, the sensing distance would decrease) |
Response frequency | NPN or PNP: 0.5kHz; Two wires of DC: 0.5kHz; Two wires of AC: 25Hz |
Leakage current | N.P Type: 13mA max; D type: 0.8mA max; A Type: 1.7mA max |
Hysteresis | 10% max. of sensing distance |
Protection circuit | DC: Reverse connection protection, Surge suppressor, Short-circuit protection AC: Surge suppressor |
Insulation resistance | 50MΩ min (between charging part and housing) |
Dielectric strength | 1000Vac, 1min (between charging part and housing) |
Temperature influence | ±10% max. of sensing distance at 23°C within temperature range of -25°C to 60°C ±15% max. of sensing distance at 23°C within temperature range of -30°C to 65°C |
Voltage influence | ±10% max. of sensing distance in rated voltage range ±15% |
IP Rating | IP65 |
Material | Case: ABS; Sensing surface: ABS |