<
NJ15+U1 series limit position inductive proximity sensor
▇ Operating form and model number
| Current type | Operating form | Contact form | Model number |
| DC | NPN | NO | NJ15-U1-E0 |
| DC | NPN | NC | NJ15-U1-E1 |
| DC | NPN | NO+NC | NJ15-U1-A0 |
| DC | PNP | NO | NJ15-U1-E2 |
| DC | PNP | NC | NJ15-U1-E3 |
| DC | PNP | NO+NC | NJ15-U1-A2 |
| DC | Two wires | NO | NJ15-U1-Z0 |
| DC | Two wires | NC | NJ15-U1-Z1 |
| AC | Two wires | NO | NJ15-U1-WS |
| AC | Two wires | NC | NJ15-U1-WO |
▇ General
| Model number | NJ15+U1 series |
| External dimensions | 40x40x118 |
| Installation type | Non-shielded |
| Detection distance | 15mm±10% |
| Setting distance | 0-13 mm |
| Supply voltage | 12-24Vdc (6-36Vdc); 110-220Vac (36-250Vac), 50/60Hz |
| Rated output current | N.P Type: 300mA max; D type: 200mA max; AC Type: 400mA |
| Standard detected object | Mild steel (50x50x1mm) |
| Sensing object | Magnetic metals (if it is not magnetic metals, the sensing distance would decrease) |
| Response frequency | NPN or PNP: 0.2kHz; Two wires of DC: 0.2kHz; Two wires of AC: 25Hz |
| Leakage current | N.P Type: 13mA max; D type: 0.8mA max; A Type: 1.7mA max |
| Hysteresis | 10% max. of sensing distance |
| Protection circuit | DC: Reverse connection protection, Surge suppressor, Short-circuit protection AC: Surge suppressor |
| Insulation resistance | 50MΩ min (between charging part and housing) |
| Dielectric strength | 1000Vac, 1min (between charging part and housing) |
| Temperature influence | ±10% max. of sensing distance at 23℃ within temperature range of -25℃ to 60℃ ±15% max. of sensing distance at 23℃ within temperature range of -30℃ to 65℃ |
| Voltage influence | ±10% max. of sensing distance in rated voltage range ±15% |
| IP Rating | IP67 |
| Material | Case: ABS; Sensing surface: ABS |
RSS