<
TL-T5 series flat shape inductive proximity sensor
▇ Operating form and model number
Current type | Operating form | Contact form | Model number |
DC | NPN | NO | TL-T5-E1 |
DC | NPN | NC | TL-T5-E2 |
DC | PNP | NO | TL-T5-F1 |
DC | PNP | NC | TL-T5-F2 |
DC | Two wires | NO | TL-T5-D1 |
DC | Two wires | NC | TL-T5-D2 |
AC | Two wires | NO | TL-T5-A1 |
AC | Two wires | NC | TL-T5-A2 |
▇ General
Model number | TL-T5 series |
External dimensions | 40x26x12 |
Installation type | Non-shielded |
Detection distance | 5mm±10% |
Setting distance | 0-4 mm |
Supply voltage | 12-24Vdc (6-36Vdc); 110-220Vac (36-250Vac), 50/60Hz |
Rated output current | N.P Type: 300mA max; D type: 200mA max; AC Type: 400mA |
Standard detected object | Mild steel (18x18x1mm) |
Sensing object | Magnetic metals (if it is not magnetic metals, the sensing distance would decrease) |
Response frequency | NPN or PNP: 0.4kHz; Two wires of DC: 0.4kHz; Two wires of AC: 25Hz |
Leakage current | N.P Type: 13mA max; D type: 0.8mA max; A Type: 1.7mA max |
Hysteresis | 10% max. of sensing distance |
Protection circuit | DC: Reverse connection protection, Surge suppressor, Short-circuit protection AC: Surge suppressor |
Insulation resistance | 50MΩ min (between charging part and housing) |
Dielectric strength | 1000Vac, 1min (between charging part and housing) |
Temperature influence | ±10% max. of sensing distance at 23°C within temperature range of -25°C to 60°C ±15% max. of sensing distance at 23°C within temperature range of -30°C to 65°C |
Voltage influence | ±10% max. of sensing distance in rated voltage range ±15% |
IP Rating | IP67 |
Material | Case: ABS; Sensing surface: ABS |