S-500 series 500W general switching power supply
|
Product
<

S-500 series 500W general switching power supply

Model number and parameters
Model number S-500-5 S-500-7.5 S-500-12 S-500-15 S-500-24 S-500-36 S-500-48
Online store:  US $39.66 / pieceOrder US $39.66 / pieceOrder US $39.66 / pieceOrder US $39.66 / pieceOrder US $39.66 / pieceOrder US $39.66 / pieceOrder US $39.66 / pieceOrder
DC output voltage 5V 7.5V 12V 15V 24V 36V 48V
Output voltage error (Note: 2) ±2% ±1% ±1% ±1% ±1% ±1% ±1%
Rated output current 80A 65A 40A 32A 20A 13.8A 10A
Output current rage 0-80A 0-65A 0-40A 0-32A 0-20A 0-13.8A 0-10A
Wave and noise (Note: 3) 75mVp-p 75mVp-p 120mVp-p 150mVp-p 240mVp-p 240mVp-p 240mVp-p
Inlets tability (Note: 4) ±0.5% ±1% ±1% ±1% ±1% ±1% ±1%
Load stability (Note: 5) ±3% ±3% ±1% ±1% ±0.3% ±0.5% ±0.5%
DC output power 400W 487.5W 480W 480W 480W 480W 495W
Effciency 80% 81% 83% 84% 86% 86% 86%
Adjustable range for DC voltage +10% +10% +10% +10% +10% +10% +10%
General
Model number S-500 series
AC input voltage range 88-132VAC/190-240VAC, selected by switch, 47-63Hz; 250-340VDC
Input current 5A/230V
AC inrush current Cold-start current: 46A/230V
Leakage current 3.5mA/240VAC max
Overload proctection 120%-150% Type:Foldback current limiting Rest:auto-recovery
Over-voltage protection 120%-150% Type:hiccup mode Rest:auto-recovery
High-temperature protection ERH3≥65℃-70℃ fan start, ≤55℃-60℃ fan close, ≥80℃-85℃, switch off output (5-15V)-(24-48V)
Temperature coefficient ±0.03%/℃ (0-50℃)
Setup rise hold up time 1s, 100ms, 50ms
Vibration 10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axes
Dielectric strength 1.5KVac, 50/60 Hz for 1 min between input and output
1.5KVac, 50/60 Hz for 1 min between input and enclosure
0.5KVac, 50/60 Hz for 1 min between output and enclosure
Isolation resistance 100MΩ min. at 500 VDC
Working temperature humidity -10℃-60℃ (Refer to output characteristic figure), 20%-90%RH
Store temperature humidity -20℃-85℃, 10%-95%RH
External dimension 238x124x65 mm
Weight 1.32kg
Safety standards GB4949,UL60950,EN60950
EMC standards GB9254 EN55022 EN55024 A level
Note 1. The testing condition for the above paramenter is: 230VAC input, rated load, 25℃, Humidity 70%RH.
2. Error, include the setting error, line stability and load stability. (Note:5)
3. Wave test: adopting A12 double wire for 20MHZ,and 0.1uF-47uF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load,the lowest voltage of enter is representative to the highest voltage
5. Load stability test: The load is from 0% to 100%.
S-500 series general switching power supply mounting dimensions