S-360 series 360W general switching power supply

Model number and parameters
Model number S-360-5 S-360-7.5 S-360-12 S-360-13.5 S-360-15 S-360-24 S-360-27 S-360-48
Online store:  US $22.16 / pieceOrder US $22.16 / pieceOrder US $12.17 / pieceOrder US $22.16 / pieceOrder US $22.16 / pieceOrder US $13.4 / pieceOrder US $22.16 / pieceOrder US $22.16 / pieceOrder
DC output voltage 5V 7.5V 12V 13.5V 15V 24V 27V 48V
Output voltage error (Note: 2) ±2% ±2% ±1% ±1% ±1% ±1% ±1% ±1%
Rated output current 50A 40A 30A 26.7A 24A 15A 13.3A 7.5A
Output current rage 0-50A 0-40A 0-30A 0-26.7A 0-24A 0-15A 0-13.3A 0-7.5A
Wave and noise (Note: 3) 75mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p
Inlets tability (Note: 4) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load stability (Note: 5) ±1% ±1% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
DC output power 250W 300W 360W 360W 360W 360W 360W 360W
Effciency 78% 78% 83% 83% 83% 84% 85% 86%
Adjustable range for DC voltage 4.5-5.6V 6-9V 10-13.2V 12-15V 13.5-18V 20-26.4V 26-32V 41-56V
Model number S-360 series
AC input voltage range 85-132VAC/176-264VAC, selected by switch, 47-63Hz; 248-370VDC
Input current 6.5A/115V, 4A/230V
AC inrush current Cold-start current: 25A/115V, 50A/230V
Leakage current 3.5mA/240VAC max
Overload proctection 105%-150% Type:Foldback current limiting Rest:auto-recovery
Over-voltage protection 5.75-6.75V, 9.4-10.9V, 13.8-16.2V, 15.5-18.2V, 18-21V, 27.6-32.4V, 33.7-39.2V, 57.6-67.2V
Temperature coefficient ±0.03%/℃ (0-50℃)
Setup rise hold up time 200ms, 100ms, 20ms
Vibration 10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axes
Dielectric strength 1.5KVac, 50/60 Hz for 1 min between input and output
1.5KVac, 50/60 Hz for 1 min between input and enclosure
0.5KVac, 50/60 Hz for 1 min between output and enclosure
Isolation resistance 100MΩ min. at 500 VDC
Working temperature humidity -10℃-60℃ (Refer to output characteristic figure), 20%-90%RH
Store temperature humidity -20℃-85℃, 10%-95%RH
External dimension 215x115x50 mm
Weight 1.15kg
Safety standards UL1950
EMC standards FCC part 15J condition level A
Note 1. The testing condition for the above paramenter is: 230VAC input, rated load, 25℃, Humidity 70%RH.
2. Error, include the setting error, line stability and load stability. (Note:5)
3. Wave test: adopting A12 double wire for 20MHZ,and 0.1uF-47uF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load,the lowest voltage of enter is representative to the highest voltage
5. Load stability test: The load is from 0% to 100%.
S-360 series general switching power supply mounting dimensions