S-35 series 35W general switching power supply
|
Product
<

S-35 series 35W general switching power supply

S-35 general switching power supply
Mouse over to zoom in
Model number and parameters
Model number S-35-5 S-35-12 S-35-15 S-35-24
Online store:  US $8.46 / pieceOrder US $8.46 / pieceOrder US $8.46 / pieceOrder US $8.46 / pieceOrder
DC output voltage 5V 12V 15V 24V
Output voltage error (Note: 2) ±2% ±1% ±1% ±1%
Rated output current 7A 3A 2.4A 1.5A
Output current rage 0-7A 0-3A 0-2.4A 0-1.5A
Wave and noise (Note: 3) 100mVp-p 75mVp-p 75mVp-p 50mVp-p
Inlets tability (Note: 4) ±0.5% ±0.5% ±0.5% ±0.5%
Load stability (Note: 5) ±1% ±0.5% ±0.5% ±0.5%
DC output power 35W 36W 36W 36W
Effciency 70% 76% 78% 78%
Adjustable range for DC voltage +10,-5% +10% +10% +10%
General
Model number S-35 series
AC input voltage range 88-132VAC/176-264VAC, selected by switch, 47-63Hz;
Input current 0.8A/115V, 0.45A/230V
AC inrush current Cold-start current: 18A/115V, 36A/230V
Leakage current 0.5mA/240VAC max
Overload proctection 105%-150% Type:Foldback current limiting Rest:auto-recovery
Temperature coefficient ±0.03%/℃ (0-50℃)
Setup rise hold up time 200ms, 100ms, 30ms
Vibration 10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axes
Dielectric strength 1.5KVac, 50/60 Hz for 1 min between input and output
1.5KVac, 50/60 Hz for 1 min between input and enclosure
0.5KVac, 50/60 Hz for 1 min between output and enclosure
Isolation resistance 100MΩ min. at 500 VDC
Working temperature humidity -10℃-60℃ (Refer to output characteristic figure), 20%-90%RH
Store temperature humidity -20℃-85℃, 10%-95%RH
External dimension 129x98x38 mm
Weight 0.4kg
Safety standards UL1950 TUV refer to 60950
EMC standards CISPR22(refer to55022), IEC1000-4-2,3,4,IEC1000-3-2
Note 1. The testing condition for the above paramenter is: 230VAC input, rated load, 25℃, Humidity 70%RH.
2. Error, include the setting error, line stability and load stability. (Note:5)
3. Wave test: adopting A12 double wire for 20MHZ,and 0.1uF-47uF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load,the lowest voltage of enter is representative to the highest voltage
5. Load stability test: The load is from 0% to 100%.
S-35 series general switching power supply mounting dimensions