S-300 series 300W general switching power supply

Model number and parameters
Model number S-300-5 S-300-7.5 S-300-12 S-300-13.5 S-300-15 S-300-24 S-300-27 S-300-48
Online store:  US $18.79 / pieceOrder US $18.79 / pieceOrder US $18.79 / pieceOrder US $18.79 / pieceOrder US $18.79 / pieceOrder US $18.79 / pieceOrder US $18.79 / pieceOrder US $18.79 / pieceOrder
DC output voltage 5V 7.5V 12V 13.5V 15V 24V 27V 48V
Output voltage error (Note: 2) ±2% ±2% ±1% ±1% ±1% ±1% ±1% ±1%
Rated output current 45A 40A 25A 22.2A 20A 12.5A 11.1A 6.3A
Output current rage 0-45A 0-40A 0-25A 0-22.2A 0-20A 0-12.5A 0-11.1A 0-6.3A
Wave and noise (Note: 3) 75mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p 75mVp-p 100mVp-p 100mVp-p
Inlets tability (Note: 4) ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load stability (Note: 5) ±1% ±1% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
DC output power 225W 300W 300W 300W 300W 300W 300W 300W
Effciency 74% 79% 83% 83% 84% 85% 85% 86%
Adjustable range for DC voltage 4.5-5.6V 6-9V 10-13.2V 12-15V 13.5-18V 20-26.4V 26-32V 41-56V
Model number S-300 series
AC input voltage range 90-132VAC/180-264VAC, selected by switch, 47-63Hz; 254-370VDC
Input current 3.6A/115V, 1.8A/230V
AC inrush current Cold-start current: 25A/115V, 50A/230V
Leakage current 3.5mA/240VAC max
Overload proctection 105%-150% Type:Foldback current limiting Rest:auto-recovery
Over-voltage protection 115%-135% Type:hiccup mode Rest:auto-recovery
Temperature coefficient ±0.03%/℃ (0-50℃)
Setup rise hold up time 200ms, 100ms, 20ms
Vibration 10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axes
Dielectric strength 1.5KVac, 50/60 Hz for 1 min between input and output
1.5KVac, 50/60 Hz for 1 min between input and enclosure
0.5KVac, 50/60 Hz for 1 min between output and enclosure
Isolation resistance 100MΩ min. at 500 VDC
Working temperature humidity -10℃-60℃ (Refer to output characteristic figure), 20%-90%RH
Store temperature humidity -20℃-85℃, 10%-95%RH
External dimension 199x110x50 mm
Weight 1kg
Safety standards UL1950
EMC standards FCC part 15J condition level A
Note 1. The testing condition for the above paramenter is: 230VAC input, rated load, 25℃, Humidity 70%RH.
2. Error, include the setting error, line stability and load stability. (Note:5)
3. Wave test: adopting A12 double wire for 20MHZ,and 0.1uF-47uF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load,the lowest voltage of enter is representative to the highest voltage
5. Load stability test: The load is from 0% to 100%.
S-300 series general switching power supply mounting dimensions