S-100 series 100W general switching power supply

Model number and parameters
Model number S-100-3 S-100-5 S-100-7.5 S-100-12 S-100-15 S-100-24 S-100-27 S-100-48
Online store:  US $11.38 / pieceOrder US $11.38 / pieceOrder US $11.38 / pieceOrder US $11.38 / pieceOrder US $11.38 / pieceOrder US $11.38 / pieceOrder US $11.38 / pieceOrder US $11.38 / pieceOrder
DC output voltage 3V 5V 7.5V 12V 15V 24V 27V 48V
Output voltage error (Note: 2) ±2% ±2% ±1% ±1% ±1% ±1% ±1% ±1%
Rated output current 20A 20A 13.6A 8.5A 6.7A 4.5A 3.7A 2A
Output current rage 0-20A 0-20A 0-13.6A 0-8.5A 0-6.7A 0-4.5A 0-3.7A 2A
Wave and noise (Note: 3) 75mVp-p 75mVp-p 70mVp-p 60mVp-p 70mVp-p 50mVp-p 50mVp-p 50mVp-p
Inlets tability (Note: 4) ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.3% ±0.2% ±0.2%
Load stability (Note: 5) ±0.5% ±1% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2%
DC output power 60W 100W 102W 102W 100.5W 108W 100W 96W
Effciency 74% 78% 80% 82% 82% 85% 86% 86%
Adjustable range for DC voltage 2.85-3V 4.75-5.5V 6.75-8.25V 10.8-13.2V 13.5-16.5V 21.6-26.4V 26-32V 43.2-52.8V
Model number S-100 series
AC input voltage range 85-132VAC/180-264VAC, selected by switch, 47-63Hz; 255-370VDC
Input current 2.4A/115V, 1.2A/230V
AC inrush current Cold-start current: 30A/115V, 60A/230V
Leakage current 1mA/240VAC max
Overload proctection 105%-150% Type:Foldback current limiting Rest:auto-recovery
Temperature coefficient ±0.03%/℃ (0-50℃)
Setup rise hold up time 200ms, 100ms, 30ms
Vibration 10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axes
Dielectric strength 1.5KVac, 50/60 Hz for 1 min between input and output
1.5KVac, 50/60 Hz for 1 min between input and enclosure
0.5KVac, 50/60 Hz for 1 min between output and enclosure
Isolation resistance 100MΩ min. at 500 VDC
Working temperature humidity -10℃-60℃ (Refer to output characteristic figure), 20%-90%RH
Store temperature humidity -20℃-85℃, 10%-95%RH
External dimension 199x98x38 mm
Weight 0.65kg
Safety standards UL1012 (not apply to mark)
EMC standards FCC part 15J condition level B
Note 1. The testing condition for the above paramenter is: 230VAC input, rated load, 25℃, Humidity 70%RH.
2. Error, include the setting error, line stability and load stability. (Note:5)
3. Wave test: adopting A12 double wire for 20MHZ,and 0.1uF-47uF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: when is over load,the lowest voltage of enter is representative to the highest voltage
5. Load stability test: The load is from 0% to 100%.
S-100 series general switching power supply mounting dimensions