|
Product
<

JWK-D10 series trough shape inductive proximity sensor

Operating form and model number
Current type Operating form Contact form Model number
DC NPN NO JWK-D10N1
DC NPN NC JWK-D10N2
DC PNP NO JWK-D10P1
DC PNP NC JWK-D10P2
DC Two wires NO JWK-D10D1
DC Two wires NC JWK-D10D2
AC Two wires NO JWK-D10A1
AC Two wires NC JWK-D10A2
General
Model number JWK-D10 series
External dimensions 30x34x61
Installation type Detect from front
Detection distance 10mm±10%
Setting distance 0-8 mm
Supply voltage 12-24Vdc (6-36Vdc); 110-220Vac (36-250Vac), 50/60Hz
Rated output current N.P Type: 300mA max; D type: 200mA max; AC Type: 400mA
Standard detected object Mild steel (30x30x1mm)
Sensing object Magnetic metals (if it is not magnetic metals, the sensing distance would decrease)
Response frequency NPN or PNP: 0.4kHz; Two wires of DC: 0.4kHz; Two wires of AC: 25Hz
Leakage current N.P Type: 13mA max; D type: 0.8mA max; A Type: 1.7mA max
Hysteresis 10% max. of sensing distance
Protection circuit DC: Reverse connection protection, Surge suppressor, Short-circuit protection
AC: Surge suppressor
Insulation resistance 50MΩ min (between charging part and housing)
Dielectric strength 1000Vac, 1min (between charging part and housing)
Temperature influence ±10% max. of sensing distance at 23℃ within temperature range of -25℃ to 60℃
±15% max. of sensing distance at 23℃ within temperature range of -30℃ to 65℃
Voltage influence ±10% max. of sensing distance in rated voltage range ±15%
IP Rating IP67
Material Case: ABS; Sensing surface: ABS