PR30-10 series full view inductive proximity sensor

Operating form and parameters
Current type Operating form Contact form Model number Online store: 
DC NPN NO PR30-10DN US $4.06 / pieceOrder
DC NPN NC PR30-10DN2 US $4.06 / pieceOrder
DC PNP NO PR30-10DP US $4.06 / pieceOrder
DC PNP NC PR30-10DP2 US $4.06 / pieceOrder
DC Two wires NO PR30-10DO
DC Two wires NC PR30-10DC
AC Two wires NO PR30-10AO US $5.09 / pieceOrder
AC Two wires NC PR30-10AC US $5.09 / pieceOrder
Model number PR30-10 series
External dimensions M30x1.5x58
Installation type Shielded
Detection distance 10mm±10%
Setting distance 0-8 mm
Supply voltage 12-24Vdc (6-36Vdc); 110-220Vac (36-250Vac), 50/60Hz
Rated output current N.P Type: 300mA max; D type: 200mA max; AC Type: 400mA
Standard detected object Mild steel (30x30x1mm)
Sensing object Magnetic metals (if it is not magnetic metals, the sensing distance would decrease)
Response frequency NPN or PNP: 0.4kHz; Two wires of DC: 0.4kHz; Two wires of AC: 25Hz
Leakage current N.P Type: 13mA max; D type: 0.8mA max; A Type: 1.7mA max
Hysteresis 10% max. of sensing distance
Protection circuit DC: Reverse connection protection, Surge suppressor, Short-circuit protection
AC: Surge suppressor
Insulation resistance 50MΩ min (between charging part and housing)
Dielectric strength 1000Vac, 1min (between charging part and housing)
Temperature influence ±10% max. of sensing distance at 23℃ within temperature range of -25℃ to 60℃
±15% max. of sensing distance at 23℃ within temperature range of -30℃ to 65℃
Voltage influence ±10% max. of sensing distance in rated voltage range ±15%
IP Rating IP67
Material Case: Brass-nickel plated; Sensing surface: ABS